- Home/
- Products/
- Heavy Duty Lathe/
- CNC Lathe/
- Flat-Bed CNC Lathes/
- BNC Series
BNC Series
Product Name : BNC Series
Product No : BNCSeries
Enlargement
One piece bed, floor type casting |
Alloy steel spindle with opposed taper roller bearings |
All gears in the headstock are hardened and precisely ground |
4 automatic ranges through pneumatic shifting |
Spindle speed ranges are automatically changed by M code |
Infinitely variable speed are commanded by S code |
Tool change are commanded by T code |
Auto lubrication system is equipped for headstock and carriage, cross-slide |
Precision tapered roller bearings are equipped on the spindle and the quill |
The quill is heat treated and precisely ground |
Inner taper of quill can suit MT#6 dead center or live center |
Turcire B lining is applied on cross slide and carriage for reducing friction |
Z axis ball screws are prtected by cover to prevent rusting and chip damage |
ITEM | UNIT | BNC-60 | BNC-70 | BNC-80 |
CAPACITY | ||||
Center height | mm.(in.) | 805 (31.69) | 930 (36.61) | 1055 (41.53) |
Swing over bed | mm.(in.) | 1550 (61.02) | 1800 (70.86) | 2050 (80.7) |
Swing over cross slide | mm.(in.) | 1070 (42.12) | 1320 (51.96) | 1570 (61.81) |
Distance between centers | mm.(in.) | 1500(60), 2000(80),3000(120), 4000(160), 5000(200), 6000(240), 7000(280), 8000(320), 9000(360), 10000(400), 11000(440), 12000(480) | ||
BED | ||||
Width | mm.(in.) | 920 (36.22) | ||
CARRIAGE | ||||
Width of cross slide | mm.(in.) | 500 (19.68) | ||
TURRET | ||||
Standard tool post | Auto 4-way or Polygon Disc or VDI Disc | |||
No. of tool stations | H4,H6 or 12 or 8 or 12 | |||
Tool shank cross section | mm.(in.) | 32 x 32 (1.25) | ||
Tool Shank diameter | mm.(in.) | 60 (2.36) | ||
TRAVEL | ||||
Cross slide(X-axis) travel | mm.(in.) | 1070 (42.12) | ||
Longitudinal(Z-axis) travel | mm.(in.) | 1500(60), 2000(80),3000(120), 4000(160), 5000(200), 6000(240), 7000(280), 8000(320), 9000(360), 10000(400), 11000(440), 12000(480) | ||
Cutting feed rate | mm./rev(in.rev) | X-axis: 0.001~250(0.00004~9.84) Z-axis: 0.001~400(0.00004~15.75) | ||
Rapid travel | M./min.(Ft.min.) | X-axis: 6(19.68) Z-axis: 10(32.7) | ||
Ball screw diameter | mm.(in.) | X-axis: 63(2.48) Z-axis: 80(3.15) | ||
TAILSTOCK | ||||
Quill type | Built - in type, Rotating tailstock quill | |||
Quill diameter | mm.(in.) | 235 (9.25) | ||
Quill travel | mm.(in.) | 200 (7.87) | ||
Inner taper of quill | MT#6 | |||
MOTOR | ||||
Headstock oil refrigerator | 18,000 BTU / 4,500 K cal | |||
Main spindle motor | KW(HP) | 30/37(40/50)-STD. 37.5/45(50/60)-OPT. | ||
Axis servo motor | KW(HP) | X-axis: 7(9.387) Z-axis: 7(9.387) | ||
Hydraulic pump motor | KW(HP) | 3.7 (5) | ||
Coolant pump motor | KW(HP) | 1.05 (1.4) | ||
Controller | ||||
Standard | FANUC 0i-T series | |||
Optional | FANUC 31i series,Other required |
Standard Accessories | |
. | Bed width : 560mm (22.04") |
. | H4 or V8 or V12 turret |
. | Rotatory tailstock quill with 235mm diameter |
. | Manual tailstock body and quill movement |
. | FANUC 0i-TD built-in manual quide |
. | Rear chip conveyor |